Integration and fusion of standard automated perimetry and optical coherence tomography data for improved automated glaucoma diagnostics

BMC Ophthalmology

Research Article

Dimitrios Bizios¹  Anders Heijl¹  Boel Bengtsson¹ 

[1] Department of Clinical Sciences Malmoe, Ophthalmology, Skåne University Hospital, Lund University, SE-205 02, Malmoe, Sweden;

关键词: Glaucoma;    Optical Coherence Tomography;    Retinal Nerve Fiber Layer;    Optic Nerve Head;    Glaucoma Patient;   

DOI  :  10.1186/1471-2415-11-20

 received in 2011-05-12, accepted in 2011-08-04,  发布年份 2011

来源: Springer

【 摘 要 】

BackgroundThe performance of glaucoma diagnostic systems could be conceivably improved by the integration of functional and structural test measurements that provide relevant and complementary information for reaching a diagnosis. The purpose of this study was to investigate the performance of data fusion methods and techniques for simple combination of Standard Automated Perimetry (SAP) and Optical Coherence Tomography (OCT) data for the diagnosis of glaucoma using Artificial Neural Networks (ANNs).MethodsHumphrey 24-2 SITA standard SAP and StratusOCT tests were prospectively collected from a randomly selected population of 125 healthy persons and 135 patients with glaucomatous optic nerve heads and used as input for the ANNs. We tested commercially available standard parameters as well as novel ones (fused OCT and SAP data) that exploit the spatial relationship between visual field areas and sectors of the OCT peripapillary scan circle. We evaluated the performance of these SAP and OCT derived parameters both separately and in combination.ResultsThe diagnostic accuracy from a combination of fused SAP and OCT data (95.39%) was higher than that of the best conventional parameters of either instrument, i.e. SAP Glaucoma Hemifield Test (p < 0.001) and OCT Retinal Nerve Fiber Layer Thickness ≥ 1 quadrant (p = 0.031). Fused OCT and combined fused OCT and SAP data provided similar Area under the Receiver Operating Characteristic Curve (AROC) values of 0.978 that were significantly larger (p = 0.047) compared to ANNs using SAP parameters alone (AROC = 0.945). On the other hand, ANNs based on the OCT parameters (AROC = 0.970) did not perform significantly worse than the ANNs based on the fused or combined forms of input data. The use of fused input increased the number of tests that were correctly classified by both SAP and OCT based ANNs.ConclusionsCompared to the use of SAP parameters, input from the combination of fused OCT and SAP parameters, and from fused OCT data, significantly increased the performance of ANNs. Integrating parameters by including a priori relevant information through data fusion may improve ANN classification accuracy compared to currently available methods.

【 授权许可】

CC BY   
© Bizios et al; licensee BioMed Central Ltd. 2011