Influence of the third element additives on the surface morphology of the wear-resistant ZrN coatings

Scanning Probe Microscopy 2018

Kuznetsova, T.A.^1 ; Lapitskaya, V.A.^1 ; Chizhik, S.A.^1 ; Warcholinski, B.^2 ; Gilewicz, A.^2 ; Kuprin, A.S.^3

A v Luikov Heat and Mass Transfer Institute of NAS Belarus, Minsk

220072, Belarus^1

Koszalin University of Technology, Faculty of Technology and Education, Koszalin, 75-453, Poland^2

NSC Kharkov Institute Physics and Technology NASU, Kharkov

61108, Ukraine^3

关键词: Steel substrate;    Structural and mechanical properties;    Substrate bias voltages;    Vacuum arc plasma;    Wear resistant;    Wear-resistant coating;    ZrN coating;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/443/1/012017/pdf
DOI  :  10.1088/1757-899X/443/1/012017

来源: IOP

【 摘 要 】

ZrN, Zr-O-N, and Zr-Si-N wear resistant coatings were formed using vacuum-arc plasma fluxes deposition at the substrate bias voltage 100 V on HS6-5-2 steel substrates. For comparison, a sample of ZrN coating at the same substrate bias voltage on the same substrate was obtained using magnetron sputtering. The structural and mechanical properties were characterized using X-ray diffraction, atomic force microscopy, and nanoindentation. The influence of O and Si additives on the surface morphology of coating were investigated.