Displacements and stresses in bending of circular perforated plate

7th International Conference on Advanced Concepts in Mechanical Engineering

Atanasiu, C.^1 ; Sorohan, St.^1

Department of Strength of Materials, POLITEHNICA University of Bucharest, Splaiul Independent 313, Bucharest

060042, Romania^1

关键词: Concentrated force;    Displacements and stress;    Distributed loads;    Experimental methods;    Holographic interferometry method;    Process equipments;    Small displacement;    Strength calculation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012095/pdf
DOI  :  10.1088/1757-899X/147/1/012095

来源: IOP

【 摘 要 】

The flat plates, perforated by a large number of holes are widely used in the engineering, especially in the component of the process equipment. Strength calculations and experimental methods used in the actual literature for study perforated plates, do not present the problem in all its complexity for stress distribution and displacements. Research and doctoral theses in last decades, with methods characteristic of the respective periods were engaged either perforated plates considered infinite and requested the median plane or rarely, plate loaded normal to the median plane, with a small number of holes. In this work the stress distribution and displacement is presented for a circular plate perforated by 96 holes arranged in a grid of squares, simply supported on the outline and loaded through a central concentrated force or by uniformly distributed load. It conducted a numerical analysis by finite element method (FEM) with a proper meshing of the plate and an experimental study by holographic interferometry. Holographic interferometry method permits to measure, with high accuracy, extremely small displacements and comparing the results with those obtained by FEM becomes sustainable. Supplementary, an analysis of a non-perforated plate with the same dimensions and stiffness, similar loaded, was performed, determining the coefficient of stress concentration for a particular arrangement of holes.