The comparative study for the isotropic and orthotropic circular plates

7th International Conference on Advanced Concepts in Mechanical Engineering

Popa, C.^1 ; Tomescu, G.^2

Mechanical Engineering Department, Valahia University, Targoviste, Romania^1

SC UPET, Targoviste, Romania^2

关键词: Analytical method;    Circular plates;    Classical plate theory;    Comparative studies;    Distributed loads;    Experimental methods;    Finite element software;    Static bending;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012107/pdf
DOI  :  10.1088/1757-899X/147/1/012107

来源: IOP

【 摘 要 】

The aim of study is static bending analysis of an isotropic circular plate using analytical method i.e. Classical Plate Theory, Finite Element software ANSYS and experimental methods. The diameter of circular plate, material properties, like modulus of elasticity (E), poissons ratio (μ) and intensity of loading is assumed at the initial stage of research work. In comparison with this plane plate we analyze a plate of same dimensions and charge, but having ribs, to see the advantage of the rigidify. The two plates are fixed supported subjected to uniformly distributed load.