Liquid-Phase Deposition of CIS Thin Layers: Final Report, February 2003--July 2005

Ernst, F. ; Pirouz, P.

National Renewable Energy Laboratory (U.S.)

关键词: Phase Diagrams;    Electronic Properties;    Solar Cells;    36 Materials Science;    Deposition;   

DOI  :  10.2172/876122
RP-ID  :  NREL/SR-520-39341
RP-ID  :  AC36-99-GO10337
RP-ID  :  876122

美国|英语

来源: UNT Digital Library

【 摘 要 】

The goal of this project was to fabricate single-phase CIS (a-Cu-In-Se, stoichiometric composition: CuInSe2) thin films for photovoltaic applications from a liquid phase - a Cu-In-Se melt of appropriate composition. This approach of liquid-phase deposition (LPD) is based on the new phase diagram we have established for Cu-In-Se, the first complete equilibrium phase diagram of this system. The liquidus projection exhibits four composition fields in which the primary solid phase, i.e., the first solid material that forms on cooling down from an entirely liquid state, is a-CuInSe2. Remarkably, none of the four composition fields is anywhere near the stoichiometric composition (CuInSe2) of a-CuInSe2. The results demonstrate that the proposed technique is indeed capable of producing films with a particularly large grain size and a correspondingly low density of grain boundaries. To obtain films sufficiently thin for solar cell applications and with a sufficiently smooth surface, it is advantageous to employ a sliding boat mechanism. Future work on liquid-phase deposition of CIS should focus on the interaction between the melt and the substrate surface, the resulting CIS interfaces, the surface morphology of the LPD-grown films, and, of course, the electronic properties of the material.