Integration of optoelectronics and MEMS by free-space micro-optics

WARREN,MIAL E. ; SPAHN,OLGA B. ; SWEATT,WILLIAM C. ; SHUL,RANDY J. ; WENDT,JOEL R. ; VAWTER,GREGORY A. ; KRYGOWSKI,TOM W. ; REYES,DAVID NMN ; RODGERS,M. STEVEN ; SNIEGOWSKI,JEFFRY J.

Sandia National Laboratories

关键词: Discriminators;    Microelectromechanical Systems;    Micro-Optoelectromechanical Systems;    Optical Systems Microelectromechanical Systems;    Deep Reactive Ion Etching;   

DOI  :  10.2172/756048
RP-ID  :  SAND2000-1337
RP-ID  :  AC04-94AL85000
RP-ID  :  756048

美国|英语

来源: UNT Digital Library

【 摘 要 】

This report represents the completion of a three-year Laboratory-Directed Research and Development (LDRD) program to investigate combining microelectromechanical systems (MEMS) with optoelectronic components as a means of realizing compact optomechanical subsystems. Some examples of possible applications are laser beam scanning, switching and routing and active focusing, spectral filtering or shattering of optical sources. The two technologies use dissimilar materials with significant compatibility problems for a common process line. This project emphasized a hybrid approach to integrating optoelectronics and MEMS. Significant progress was made in developing processing capabilities for adding optical function to MEMS components, such as metal mirror coatings and through-vias in the substrate. These processes were used to demonstrate two integration examples, a MEMS discriminator driven by laser illuminated photovoltaic cells and a MEMS shutter or chopper. Another major difficulty with direct integration is providing the optical path for the MEMS components to interact with the light. The authors explored using folded optical paths in a transparent substrate to provide the interconnection route between the components of the system. The components can be surface-mounted by flip-chip bonding to the substrate. Micro-optics can be fabricated into the substrate to reflect and refocus the light so that it can propagate from one device to another and them be directed out of the substrate into free space. The MEMS components do not require the development of transparent optics and can be completely compatible with the current 5-level polysilicon process. They report progress on a MEMS-based laser scanner using these concepts.