Biomass-derived ultrathin carbon-shell coated iron nanoparticles as high-performance tri-functional HER, ORR and Fenton-like catalysts

JOURNAL OF CLEANER PRODUCTION

卷:275

Article

Ahsan, Md Ariful^1,2  Santiago, Alain R. Puente¹  Rodriguez, Alejandro¹  Maturano-Rojas, Viridiana³  Alvarado-Tenorio, Bonifacio⁴  Bernal, Ricardo¹  Noveron, Juan C.^1,2 

[1] Univ Texas El Paso, Dept Chem & Biochem, 500 W Univ Ave, El Paso, TX 79968 USA

[2] Nanosyst Engn Res Ctr Nanotechnol Enabled Water T, Houston, TX USA

[3] Univ Nacl Autonoma Mexico, Inst Invest Mat, Mexico City, DF, Mexico

[4] Univ Autonoma Ciudad Juarez, Ciudad Juarez, Chihuahua, Mexico

关键词: Advanced oxidation process;    Biomass;    Clean energy;    Hydrogen evolution reaction;    Iron nanoparticles;    Water treatment;   

DOI  :  10.1016/j.jclepro.2020.124141

来源: Elsevier

【 摘 要 】

The development of cost-effective carbon-shell coated metal-based nanocatalysts is currently a highly desirable goal towards the fabrication of more sustainable non-precious nanocatalysts. Herein, we design an easy, cheap, scalable, and eco-friendly carbothermal reduction strategy to develop core-shell structured metallic iron nanoparticles using coffee waste grounds as starting renewable materials (Fe@BMC). The structural properties of the as-synthesized nanoparticles were nicely tuned by varying the reaction temperature. Remarkably, ultrathin carbon-shell coated metallic iron nanoparticles were obtained at 800 degrees C, which was clearly elucidated by the HRTEM, XRD, and XPS measurements. The Fe-800 degrees C@BMC nanocatalyst showed excellent properties as an ORR electrocatalyst with an onset potential of 0.93 V vs RHE, keeping 90% of the initial current applied after the 20000s. Noticeably, the Fe-800 degrees C@BMC carbon-shell nanostructures delivered a Pt-like performance with a very low onset potential of -25 mV vs RHE, an overpotential of 75 mV at a current density of 10 mA cm(-2) and an ultrahigh stability to keep the 99% of the initial current applied after 20000s, behaving like one of the most efficient HER core-shell structured non-precious electrocatalysts reported up to now. Also, the Fenton like catalytic studies revealed that the Fe-800 degrees C@BMC nanocatalyst was so far the most active catalyst for the degradation of tetracycline (TC) antibiotic allowing the degradation of 95.72% of TC in 45 min with a higher reaction rate constant of 0.068 min(-1). The impressive catalytic behavior of the Fe-800 degrees C@BMC nanocatalyst was attributed to the hierarchically porous carbon network as well as to the synergistic interaction between the encapsulated metallic iron core and the ultrathin carbon shell, which regulate the adsorption energy of the reactive species. The present work offers new insights into the development of scalable and high-performance tri-functional catalysts through a sustainable and low-cost synthetic route. (C) 2020 Elsevier Ltd. All rights reserved.

【 授权许可】

Free