Structural evolution in ZrNxOy thin films as a function of temperature

SURFACE & COATINGS TECHNOLOGY

卷:200

Article

Cunha, L ; Vaz, F ; Moura, C ; Rebouta, L ; Carvalho, P ; Alves, E ; Cavaleiro, A ; Goudeau, P ; Rivière, JP

关键词: zirconium oxynitride;    PVD coatings;    decorative coatings;    heat treatment;   

DOI  :  10.1016/j.surfcoat.2004.09.030

来源: Elsevier

【 摘 要 】

Single-layered zirconium oxynitride (ZrNOxOy) thin films have been deposited on steel substrates, at a constant temperature of 300 degrees C, by radiofrequency (rf) reactive magnetron sputtering of a pure Zr target in an argon-oxygen-nitrogen atmosphere. The variation of the flow rate of the reactive gases enabled changes in the composition and structure of the films. X-ray diffraction (XRD) and glancing incidence X-ray diffraction (GLXRD) were used to study the as-deposited films and their structural changes during or after heat treatment, from 400 to 900 degrees C, in controlled atmosphere and in vacuum. The as-deposited films revealed the occurrence of a face-centred cubic (fcc) phase (Zr-N type), but a Zr-N oxygen-doped phase (Zr-N-O) may be also present depending on the oxygen content in the films. Heat treatment above 600 degrees C reveals the appearance of a tetragonal phase of zirconium oxide. The results are discussed as a function of the chemical composition of the films, annealing temperature, and type of the annealing process. (c) 2004 Elsevier B.V. All rights reserved.

【 授权许可】

Free