Enhancing the ferroelectric performance of P(VDF-co-TrFE) through modulation of crystallinity and polymorphism

POLYMER

卷:149

Article

Spampinato, Nicoletta¹  Maiz, Jon^1,4,5  Portale, Giuseppe²  Maglione, Mario³  Hadziioannou, Georges¹  Pavlopoulou, Eleni¹ 

[1] Univ Bordeaux, Bordeaux INP, CNRS, LCPO,UMR 5629, 16 Av Pey Berland, F-33607 Pessac, France

[2] Univ Groningen, Zernike Inst Adv Mat, Nijenborgh 4, NL-9747 AG Groningen, Netherlands

[3] ICMCB, UPR9048, CNRS, 87 Av Dr Schweitzer, F-33608 Pessac, France

[4] Univ Basque Country, UPV EHU, POLYMAT, Paseo Manuel de Lardizabal 3, Donostia San Sebastian 20018, Spain

[5] Univ Basque Country, UPV EHU, Polymer Sci & Technol Dept, Paseo Manuel de Lardizabal 3, Donostia San Sebastian 20018, Spain

关键词: Ferroelectric polymers;    P(vdf-trfe);    Processing;    Structure-function relations;    Giwaxs;   

DOI  :  10.1016/j.polymer.2018.06.072

来源: Elsevier

【 摘 要 】

The functional properties of P(VDF-co-TrFE) are strongly dependent on its structure, which, in turn, depends on processing conditions applied. In this work we investigate the P(VDF-co-TrFE) processing structure-function relationships, in order to find the thermal conditions that result in optimum ferroelectric performance in thin film configuration. Our results show that annealing temperature affects mostly the remnant polarization value, P, while annealing time has a severe effect on the coercive field, E-c, An optimized ferroelectric functionality, in terms of high P-r of about 90 mC/m(2) and low E-c of 50 MV/m, is achieved and rationalized through structural analysis by means of GIWAXS. The best performing structure exhibits a high degree of crystallinity, a preferential orientation of the crystallites with the polymer chains parallel to the substrate and the occurrence of three ferroelectric phases. A deconvolution study demonstrates the presence of a moderately unstable ferroelectric phase that is designated to facilitate ferroelectric switching. Our findings show that a single step of 15 min annealing at 135 degrees C leads to high performance P(VDF-co-TrFE) structure, proving that the 2 h-long annealing step that is traditionally applied is not necessary. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free