Influence of grain structure on the deformation mechanism in martensitic shear reversion-induced Fe-16Cr-10Ni model austenitic alloy with low interstitial content: Coarse-grained versus nano-grained/ultrafine-grained structure

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:661

Article

Challa, V. S. A.¹  Misra, R. D. K.¹  Somani, M. C.²  Wang, Z. D.³ 

[1] Univ Texas El Paso, Dept Met Mat Engn & Biomed Engn, Lab Excellence Adv Steel Res, El Paso, TX 79968 USA

[2] Univ Oulu, Ctr Adv Steels Res, POB 4200, Oulu 90014, Finland

[3] Northeastern Univ, State Key Lab Rolling & Automat, 3-11 Wenhua Rd, Shenyang 110819, Peoples R China

关键词: Austenitic stainless steel;    Nanograined structure;    Deformation mechanism;    Electron microscopy;    Twinning;   

DOI  :  10.1016/j.msea.2016.03.002

来源: Elsevier

【 摘 要 】

Nanograined/ultrafine-grained (NG/UFG) materials characterized by high strength-high ductility combination are excellent vehicles to obtain an unambiguous understanding of deformation mechanisms visa-vis their coarse-grained counterparts. In this context, the innovative concept of phase reversion-induced NG/UFG structure enabled achieving high strength besides comparable ductility, for instance, in metastable austenitic stainless steels. In the phase reversion process, severe deformation of austenite at room temperature (typically similar to 60-80%) transforms face-centered cubic austenite (gamma) to body centered cubic martensite (alpha'). Upon annealing, martensite reverts to austenite leading to extensive grain refinement. The objective of the present study to fundamentally understand the deformation mechanisms in NG/UFG structure in relation to that of the coarse-grained (CG) structure was accomplished by combining depth-sensing nanoscale experiments on an Fe-16Cr-10Ni model austenitic alloy conducted at different strain rates, followed by the study of structural evolution in the deformed zone using transmission electron microscopy (TEM). In the high strength NG/UFG steel (YS similar to 585 MPa), stacking faults and nanotwins contributed to the enhanced ductility (El similar to 35%), while in the case of low strength (YS similar to 260 MPa) coarse-grained (CG) counterpart, ductility was also high (El similar to 40%), but chiefly due to strain-induced martensite, which points to a clear case of grain size effect (and the corresponding level of strength). The distinct change in the deformation mechanism from stacking faults and twinning-induced plasticity (TWIP) in the NG structure to transformation-induced plasticity (TRIP) in the CG structure is elucidated in terms of austenite stability-strain energy relationship. The insights on the relationship between grain structure (and strength) and deformation mechanisms are envisaged to be important in providing a new direction for the futuristic design of high strength-high ductility NG/UFG materials such as austenitic stainless steel and twinning induced plasticity steels. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free