Effects of drip tape modes on soil hydrothermal conditions and cotton yield ( Gossypium hirsutum L.) under machine-harvest patterns

PeerJ

article

Dongwang Wang¹  Zhenhua Wang¹  Tingbo Lv¹  Rui Zong¹  Yan Zhu¹  Jinzhu Zhang¹  Tianyu Wang¹ 

[1] Shihezi University, Key Laboratory of Modern Water-Saving Irrigation of Xinjiang Production and Construction Corps;Shihezi University, College of Water Resources and Architectural Engineering

关键词: Drip tape modes;    Soil temperature;    Soil moisture;    Soil salinity;    Cotton yield and quality;    Water use efficiency;    Machine-harvest cotton;   

DOI  :  10.7717/peerj.12004

学科分类：社会科学、人文和艺术（综合）

来源: Inra

【 摘 要 】

Background The layout of drip tapes under mulch has changed in Xinjiang, China, with the development of machine-harvest cotton (Gossypium hirsutum L.) planting technology. This study aims to demonstrate the effects of drip tape modes on soil hydrothermal conditions, cotton yield, and water use efficiency (WUE) of machine-harvest cotton under mulch in Xinjiang. Methods A field experiment was conducted to set up two machine-harvest cotton planting patterns (T1: the cotton planting model with one film, two drip tapes and six rows; T2: the cotton planting model with one film, three drip tapes and six rows), and a conventional planting mode (T3: the cotton planting model with one film, two drip tapes and four rows) as a control. Results Our results showed that the heat preservation and warming effects of the cotton planting model with one film, two drip tapes and six rows and the cotton planting model with one film, three drip tapes and six rows were better than that of the conventional planting mode. Soil temperature under the mulching film quickly increased and slowly decreased, which was beneficial to the early growth and development of cotton. The mean soil moisture content of the 0–60 cm soil layer in the cotton planting model with one film, three drip tapes and six rows was significantly higher than the other two treatments at the middle and late stage of cotton growth (90 days after sowing (DAS) and 135 DAS). Moreover, the water holding capacity of the middle and upper part of the tillage layer in the cotton planting model with one film, three drip tapes and six rows was the best. At the medium cotton growth stage, the main root layer in the cotton planting model with one film, three drip tapes and six rows formed a desalination zone. At the late cotton growth stage, the soil salinity content of the 0–60 cm soil layer showed that the cotton planting model with one film, three drip tapes and six rows was the lowest, the cotton planting model with one film, two drip tapes and six rows was the highest, and the conventional planting pattern was in the middle. Among these three modes, the cotton planting model with one film, three drip tapes and six rows was more efficient in controlling soil salt accumulation. The agronomic traits and cotton quality in the cotton planting model with one film, three drip tapes and six rows were better than that for the other two treatments. Compared with the other treatments, the cotton yield in the cotton planting model with one film, three drip tapes and six rows increased by 6.15% and 11.0% and 8.1% and 12.3%, in 2017 and 2018, respectively, and WUE increased by 17.4% and 22.7% and 20.9% and 22.8%, in 2017 and 2018 respectively. In conclusion, the cotton planting model with one film, three drip tapes and six rows can be recommended for machine-harvest cotton planting for arid areas in Xinjiang, considering water conservation and improving cotton yield.

【 授权许可】

CC BY