A computational approach for thermo-elasto-plastic frictional contact based on a monolithic formulation using non-smooth nonlinear complementarity functions

Advanced Modeling and Simulation in Engineering Sciences

卷:5

Wolfgang A. Wall¹  Alexander Seitz¹  Alexander Popp² 

[1] Institute for Computational Mechanics, Technical University of Munich;

[2] Institute for Mathematics and Computer-Based Simulation, University of the Bundeswehr Munich;

关键词: Contact mechanics;    Heat transfer;    Frictional heating;    Thermo-plasticity;    Thermo-structure-interaction;    Dual mortar methods;   

DOI  :  10.1186/s40323-018-0098-3

来源: DOAJ

【 摘 要 】

Abstract A new monolithic solution scheme for thermo-elasto-plasticity and thermo-elasto-plastic frictional contact with finite deformations and finite strains is presented. A key feature is the reformulation of all involved inequality constraints, namely those of Hill’s orthotropic yield criterion as well as the normal and tangential contact constraints, in terms of non-smooth nonlinear complementarity functions. Using a consistent linearization, this system of equations can be solved with a non-smooth variant of Newton’s method. A quadrature point-wise decoupled plastic constraint enforcement and the use of so-called dual basis functions in the mortar contact formulation allow for a condensation of all additionally introduced variables, thus resulting in an efficient formulation that contains discrete displacement and temperature degrees of freedom only, while, at the same time, an exact constraint enforcement is assured. Numerical examples from thermo-plasticity, thermo-elastic frictional contact and thermo-elasto-plastic frictional contact demonstrate the wide range of applications covered by the presented method.

【 授权许可】

Unknown