Post-consumer polyethylene terephthalate and polyamide 66 blends and corresponding short glass fiber reinforced composites

Materials Research

Marcus Vinicius Novello²  Lilian Gasparelli Carreira²  Leonardo Bresciani Canto¹ 

[1] ,Federal University of Rio de Janeiro Institute of Macromolecules Rio de Janeiro RJ ,Brazil

关键词: PET;    PA66;    nylon 66;    short glass fiber;    composite;    blend;   

DOI  :  10.1590/1516-1439.281914

来源: SciELO

【 摘 要 】

Blends of bottle-grade post-consumer polyethylene terephthalate (PET) and virgin polyamide 66 (PA66), over the complete composition range, and corresponding short glass fiber (SGF) reinforced composites were investigated. These materials were compounded in a twin-screw extruder and injection molded as standard specimens. Morphological investigation of the composites revealed that the short glass fibers have a good size distribution and are homogenously dispersed within a polymeric matrix. The PET/PA66/SGF composites showed good mechanical performance in flexural, tensile and impact tests demonstrating that the addition of SGFs to PET/PA66 blends is an interesting approach to obtaining new thermoplastic composites. In addition, this represents a potential application for post-consumer PET, an abundant and cheap material, in the well-established market of PA66/SGF composites, which are widely used in technical parts requiring high mechanical and thermal properties.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License