Energies | |
Parabolic Trough Photovoltaic/Thermal Collectors: Design and Simulation Model | |
Francesco Calise1  | |
[1] Department of Energetics, Applied Thermofluidodynamics and Environmental Conditioning (DETEC), University of Naples Federico II, P.le Tecchio 80, 80125 Naples, Italy | |
关键词: PVT; triple-junction; solar energy; | |
DOI : 10.3390/en5104186 | |
来源: mdpi | |
【 摘 要 】
This paper presents a design procedure and a simulation model of a novel concentrating PVT collector. The layout of the PVT system under investigation was derived from a prototype recently presented in literature and commercially available. The prototype consisted in a parabolic trough concentrator and a linear triangular receiver. In that prototype, the bottom surfaces of the receiver are equipped with mono-crystalline silicon cells whereas the top surface is covered by an absorbing surface. The aperture area of the parabola was covered by a glass in order to improve the thermal efficiency of the system. In the modified version of the collector considered in this paper, two changes are implemented: the cover glass was eliminated and the mono-crystalline silicon cells were replaced by triple-junction cells. In order to analyze PVT performance, a detailed mathematical model was implemented. This model is based on zero-dimensional energy balances. The simulation model calculates the temperatures of the main components of the system and the main energy flows Results showed that the performance of the system is excellent even when the fluid temperature is very high (>100 °C). Conversely, both electrical and thermal efficiencies dramatically decrease when the incident beam radiation decreases.
【 授权许可】
CC BY
© 2012 by the authors; licensee MDPI, Basel, Switzerland.
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
RO202003190041106ZK.pdf | 416KB | download |