A Multi-Stage Human Factors and Comfort Assessment of Instrumented Insoles Designed for Use in a Connected Health Infrastructure

Journal of Personalized Medicine

Richard Harte²  Leo R. Quinlan¹  Liam Glynn⁵  Alejandro Rodriguez-Molinero²  Thomas Scharf⁶  Carlos Carenas³  Elisenda Reixach³  Joan Garcia⁴  Jordi Carrabina⁴  Gearóid ÓLaighin² 

[1]Physiology, School of Medicine, NUI Galway, University Road, Galway, Ireland

[2]Electrical and Electronic Engineering, School of Engineering and Informatics, NUI Galway, University Road, Galway, Ireland

[3] E-Mails:

[4]CETEMMSA, Av. d’Ernest Lluch 36, 08302 Mataró, Spain

[5] E-Mails:

[6]Cephis Wireless ULPA, Universitat Autònoma de Barcelona, Escola d’Enginyeria, 08193 Bellaterra, Spain

[7] E-Mails:

[8]General Practice, School of Medicine, NUI Galway, University Road, Galway, Ireland

[9] E-Mail:

[10]Irish Centre for Social Gerontology, Institute for Lifecourse and Society, NUI Galway, University Road, Galway, Ireland

[11] E-Mail:

关键词: instrumented insole;    gait analysis;    comfort;    human factors;    human centered design;    mHealth;    eHealth;    connected health;    wearable electronics;    older adult;   

DOI  :  10.3390/jpm5040487

来源: mdpi

【 摘 要 】

Wearable electronics are gaining widespread use as enabling technologies, monitoring human physical activity and behavior as part of connected health infrastructures. Attention to human factors and comfort of these devices can greatly positively influence user experience, with a subsequently higher likelihood of user acceptance and lower levels of device rejection. Here, we employ a human factors and comfort assessment methodology grounded in the principles of human-centered design to influence and enhance the design of an instrumented insole. A use case was developed and interrogated by stakeholders, experts, and end users, capturing the context of use and user characteristics for the instrumented insole. This use case informed all stages of the design process through two full design cycles, leading to the development of an initial version 1 and a later version 2 prototype. Each version of the prototype was subjected to an expert human factors inspection and controlled comfort assessment using human volunteers. Structured feedback from the first cycle of testing was the driver of design changes implemented in the version 2 prototype. This prototype was found to have significantly improved human factors and comfort characteristics over the first version of the prototype. Expert inspection found that many of the original problems in the first prototype had been resolved in the second prototype. Furthermore, a comfort assessment of this prototype with a group of young healthy adults showed it to be indistinguishable from their normal footwear. This study demonstrates the power and effectiveness of human factors and comfort assessment methodologies in influencing and improving the design of wearable devices.

【 授权许可】

CC BY   
© 2015 by the authors; licensee MDPI, Basel, Switzerland.