Steam Reforming of Fuels in a Reformer for Phosphoric Acid Fuel Cells and Its Dynamic Behavior When Switching Fuels

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Masaru Tomura²  Tetsuo Take¹  Tohru Koyashiki¹ 

[1] NTT Interdisciplinary Research Laboratories;NTT Advanced Technology Corporation

关键词: Energy;    Steam Reforming;    Reformer;    Ni-Al2O3 Catalyst;    Methane;    Propane;    Methanol;    Phosphoric Acid Fuel Cell;   

DOI  :  10.1252/jcej.28.393

来源: Maruzen Company Ltd

【 摘 要 】

References(3)We clarified experimentally that a Ni-Al2O3 catalyst is active for steam reforming of methanol at 450–750°C, and that it results in a different reaction to that obtained when using a CuO-ZnO catalyst. We also analyzed the characteristics of Ni-Al2O3-catalyzed steam reforming in a reformer when switching fuel from methane to methanol or propane, and vice versa. The flow rates of hydrogen and carbon monoxide in the steam-reformed gas can be kept almost constant by controlling the supply rates of fuel and steam. The methanol decomposition reaction and the propane steam reforming reaction occur mostly near the gas inlet of the catalyst bed, unlike the methane steam reforming reaction. We demonstrated experimentally that by regulating the rates of fuel and steam supplied to a reformer and by using a Ni-Al2O3 reforming catalyst. a phosphoric acid fuel cell power plant generates a continuous constant power of 9.6 kW or 26 kW when the pipeline gas 13A fuel is switched to methanol or propane respectively, and vice versa.

【 授权许可】

Unknown