A METHOD USING GNSS LH-REFLECTED SIGNALS FOR SOIL ROUGHNESS ESTIMATION

International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences

Li, W.^1¹  Jia, Y.^1² 

[1]College of Communication Engineering, Dalian University, Dalian, China^2

[2]Nanjing University of Posts and Telecommunications, Nanjing, China^1

关键词: GNSS-R;    Roughness model;    Reflectivity;    Surface roughness;    Soil moisture;    Bare soil;   

DOI  :  10.5194/isprs-archives-XLII-3-637-2018

学科分类：地球科学(综合)

来源: Copernicus Publications

【 摘 要 】

Global Navigation Satellite System Reflectometry (GNSS-R) is based on the concept of receiving GPS signals reflected by the ground using a passive receiver. The receiver can be on the ground or installed on a small aircraft or UAV and collects the electromagnetic field scattered from the surface of the Earth. The received signals are then analyzed to determine the characteristics of the surface. Many research has been reported showing the capability of the GNSS-R technique. However, the roughness of the surface impacts the phase and amplitude of the received signals, which is still a worthwhile study. This paper presented a method can be used by GNSS-R to estimate the surface roughness. First, the data was calculated in the specular reflection with the assumption of a flat surface with different permittivity. Since the power reflectivity can be evaluated as the ratio of left-hand (LH) reflected signal to the direct right-hand (RH) signal. Then a semi-empirical roughness model was applied to the data for testing. The results showed the method can distinguish the water and the soil surface. The sensitivity of the parameters was also analyzed. It indicates this method for soil roughness estimation can be used by GNSS-R LH reflected signals. In the next step, several experiments need to be done for improving the model and exploring the way of the estimation.

【 授权许可】

CC BY