| ETRI Journal | |
| Effective Silicon Oxide Formation on Silica-on-Silicon Platforms for Optical Hybrid Integration | |
| 关键词: PLC; Thermal Oxidation; PECVD; Flame Hydrolysis Deposition; Silica Platform; | |
| Others : 1184839 DOI : 10.4218/etrij.03.0102.0208 |
|
PDF
|
|
【 摘 要 】
This paper describes an effective method for forming silicon oxide on silica-on-silicon platforms, which results in excellent characteristics for hybrid integration. Among the many processes involved in fabricating silica-on-silicon platforms with planar lightwave circuits (PLCs), the process for forming silicon oxide on an etched silicon substrate is very important for obtaining transparent silica film because it determines the compatibility at the interface between the silicon and the silica film. To investigate the effects of the formation process of the silicon oxide on the characteristics of the silica PLC platform, we compared two silicon oxide formation processes: thermal oxidation and plasma-enhanced chemical vapor deposition (PECVD). Thermal oxidation in fabricating silica platforms generates defects and a cristobalite crystal phase, which results in deterioration of the optical waveguide characteristics. On the other hand, a silica platform with the silicon oxide layer deposited by PECVD has a transparent planar optical waveguide because the crystal growth of the silica has been suppressed. We confirm that the PECVD method is an effective process for silicon oxide formation for a silica platform with excellent characteristics.
【 授权许可】
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| 20150520103936944.pdf | 410KB |
【 参考文献 】
- [1]Kyungsik Lee, Kug Chang Kang, Taehan Lee, and Sungsoo Park, "An Optimization Approach to Routing and Wavelength Assignment in WDM All-Optical Mesh Networks without Wavelength Conversion," ETRI J., vol. 24, no. 2, Apr. 2002, pp. 131-141.
- [2]R. Hui, B. Zhu, R. Huang, C.T. Allen, K.R. Demarest, and D. Richards, "Subcarrier Multiplexing for High-Speed Optical Transmission," J. Lightwave Technol., vol. 20, no. 3, 2002, pp. 417-427.
- [3]L.A. Bergman, C. Yeh, and J. Morookian, "Advances in Multichannel MultiGbytes/s Bit-Parallel WDM Single Fiber Link," IEEE Trans. on Advanced Packaging, vol. 24, no. 4, 2001, pp. 456-462.
- [4]K.C. Reichmann, P.P. Iannone, M. Birk, N.J. Frigo, D. Barbier, C. Cassagnettes, T. Garret, A. Verlucco, S. Perrier, and J. Philipsen, "An Eight-Wavelength 160-km Transparent Metro WDM Ring Network Featuring Cascaded Erbium-Doped Waveguide Amplifiers," IEE
- [5]D. Cavendish, "Evolution of Optical Transport Technologies: From SONET/SDH to WDM," IEEE Comm. Mag., June 2000, pp. 164-172.
- [6]Seung Kwan Kim, Sun Hyok Chang, Jin Soo Han, and Moo Jung Chu, "Design of Hybrid Optical Amplifier for High Capacity Optical Transmission," ETRI J., vol. 24, no. 2, Apr. 2002, pp. 81-96.
- [7]S.-J. Park, K.-T. Jeong, S.-H. Park, and H.-K. Sung, "A Novel Method for Fabrication of a PLC Platform for Hybrid Integration of an Optical Module by Passive Alignment," IEEE Photon. Technol. Lett., vol. 14, no. 4, 2002, pp. 486-488.
- [8]Myung-Hyun Lee, Jung Jin Ju, Suntak Park, Jung Yun Do, and Seung Koo Park, "Polymer-Based Devices for Optical Communications," ETRI J., vol. 24, no. 4, Aug. 2002, pp. 259-269.
- [9]K. Kato and Y. Tohmori, "PLC Hybrid Integration Technology and Its Application to Photonic Component," IEEE J. Selected Topics in Quantum Electron., vol. 6, no. 1, 2000, pp. 4-13.
- [10]M. Kawachi, "Silica Waveguides on Silicon and their Application to Integrated Components," Opt. Quantum Electron., vol. 22, 1990, pp. 391-416.
- [11]S. Mino, T. Ohyama, Y. Akahori, M. Yanagisawa, T. Hashimoto, Y. Yamada, H. Tsunetsugu, M. Togashi, Y. Itaya, and Y. Shibata, "High-Speed Optoelectronic Hybrid-Integrated Transmitter Module Using a Planar Lightwave Circuit (PLC) Platform," IEEE Photon. Tec
- [12]S. Mino, K. Yoshino, Y. Yamada, T. Terui, M. Yasu, and K. Morowaki, "Planar Lightwave Circuit Platform with Coplanar Waveguide for Opto-Electronic Hybrid Integration," J. Lightwave Technol., vol. 13, no. 12, 1995, pp. 2320-2326.
- [13]A. Himeno, K. Kato, and T. Miya, "Silica-Based Planar Lightwave Circuits," IEEE J. Selected Topics Quantum Electron., vol. 4, no. 6, 1998, pp. 4-13.
- [14]T. Ito, I. Ogawa, Y. Suzaki, K. Magari, Y. Kawaguchi, and O. Mitomi, "Simultaneous Wavelength Conversion Using SOAPLC Hybrid Wavelength Selector," IEICE Trans. Electron., vol. E83-C, no. 6, 2000, pp. 892-897.
- [15]Y. Hibino, Y. Hida, A. Kaneko, M. Itho, T. Goh, A. Saida, A. Himeno, and Y. Ohmori, "Fabrication of Silica-on-Si Waveguide with High Index Difference and Its Application to 256 Channel Arrayed-Waveguide Multi/Demultiplexer," OFC Conf.2000, vol. 2, 2000, p
- [16]Y. Inoue, T. Oguchi, Y. Hibino, S. Suzuki, M. Yanagisawa, K. Moriwaki, and Y. Yamada, "Filter-Embedded Wavelength-Division Multiplexer for Hybrid-Integrated Transceiver Based on Silica-Based PLC," Electron. Lett., vol. 32, no. 9, 1996, pp. 847-848.
- [17]N. Uchida, Y. Hibino, Y. Suzuki, T. Kurosaki, N. Ishihara, M. Nakamura, T. Hashimoto, Y. Akahori, Y. Inoue, K. Moriwaki, Y. Yamada, K. Kato, Y. Tohmori, M. Wada, and T. Sugie, "Passively Aligned Hybrid WDM Module Integrated with Spot-Size Converter Integr
- [18]J. Sasaki, H. Hatakeyama, T. Tamaniki, S. Kitamura, M. Yamaguchi, N. Kitamura, T. Shimoda, M. Kitamura, T. Kato, and M. Itoh, "Hybrid Integrated 4×4 Optical Matrix Switch Using Self-Aligned Semiconductor Optical Amplifier Gate Arrays and Silica Planar Li
- [19]J.M. Ruano, V. Benoit, J.S. Aitchison, and J.M. Cooper, "Flame Hydrolysis Deposition of Glass on Silicon for the Integration of Optical Microfluidic Devices," Anal. Chem., vol. 72, 2000, pp. 1093-1097.
- [20]J.R. Bonar and J.S. Aitchison, "Co-Doping Effects in Rare-Earth-Doped Planar Waveguides," IEE Proc.-Optoelectron., vol. 143, no. 5, 1996, pp. 293-297.
- [21]G. Barbarossa and P.J.R. Laybourn, "Vertically Integrated High-Silica Channel Waveguide on Si," Electron. Lett., vol. 28, no. 5, 1992, pp. 437-438.
- [22]H. Han, R. Boudreau, T. Bowen, S. Tan, and M.L. Reed, "Etching Defects on KOH Etched Silicon-Implementation of Silicon Bench Technology for Low Cost Packaging," ECTC 44th Conf. Proc., 1994, pp. 625-631.
- [23]F. Giles, A. Nejim, and P.L.F. Hemment, "New Etchant for Crystallographic Defect Studies in Thin SOI Materials(<1000Å)," Electro. Lett., vol. 29, no. 9, 1993, pp. 788-789.
- [24]D.K. Sadana, J. Lasky, H.J. Hovel, K. Petrillo, and P. Roitman, "Nano-Defect in Commercial Bonded SOI and SIMOX," Proc. 1994 IEEE Int’l SOI Conf., 1994, pp. 111-112.
- [25]Romania, "A Comparison between the Complexant Alkaline Etching System of Silicon," 1999 Semiconductor Conf., vol. 1, 1999, pp. 205-208.
- [26]W.W. Liu, L. Xiaowei, W. Xilian, L. Yuqiang, and F. Maojun, "Investigation of KOH Anisotropic of SI <100> Wafers for Improving Etched Surface Quality," Solid-State & Integrated Circuit Technol., 5th Int’l Conf., 1998, pp. 127-130.
- [27]S.S. Tan, H. Han, and R. Boufreau, and M.L. Reed, "Process Induced Hillock Defects on Anisotropically Etched Silicon,"MEMS’94 proc., IEEE Workshop on 1994, pp. 229-234.
- [28]S.S. Tan, M.L. Reed, H. Han, and R. Boufreau, "Mechanism of Etch Hillock Formation," J. MEMS., vol. 5, no. 1, 1996, pp. 66-72.
PDF