Entylene Vinyl Acetate/Carbonized Wood Fiber Composites: The Effect of Zinc Chloride Content on Tensile Properties, Electrical Properties and Thermal Degradation

International Conference on Advanced Manufacturing and Industry Applications

机械制造;工业技术

Hanif, M.P.M.^1,2 ; Rozyanty, A.R.^1,2 ; Hajar, M.D.S.^1 ; Tan, S.J.^1,2 ; Supri, A.G.^3

School of Materials Engineering, Universiti Malaysia Perlis (UniMAP), Kompleks Taman Muhibah, Jejawi 2, Perlis, Arau

02600, Malaysia^1

Center of Excellence Geopolymer and Green Technology, School of Materials Engineering, Universiti Malaysia Perlis (UniMAP), Kompleks Taman Muhibah, Jejawi 2, Perlis, Arau

02600, Malaysia^2

Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP), Kampus UniCITI Alam, Sungai Chuchuh, Padang Besar, Perlis

02100, Malaysia^3

关键词: Bioactive molecules;    Chloride contents;    Conductive composites;    Conventional furnace;    Electrical conductivity;    Ethylene vinyl acetates;    Surface modification process;    Wood-fiber composites;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/429/1/012037/pdf
DOI  :  10.1088/1757-899X/429/1/012037

学科分类：工业工程学

来源: IOP

【 摘 要 】

Challenges faced to develop conductive composites comprised of poor electro-active stability, control of the mobility, mechanical properties, presentation and concentration of bioactive molecules. Carbonized wood fiber (CWF) was successfully produced from waste wood fiber by using conventional furnace machine at 700 °C in air atmosphere for 4 hours. While, CWF coated ZnCl2 was carried out surface modification process via ethanol solution. In this study, the effect of different ZnCl2 content coating CWF with the fixed CWF filler and ethylene vinyl acetate (EVA) composites was studied. The samples were prepared by using Brabender Plasticoder at 160 °C and 50 rpm rotor speed. The result indicated that increasing ZnCl2 content showed tensile strength, tensile modulus, electrical conductivity, and thermal stability compared to unmodified composites.