Development of dry coal gravity separation techniques

Mineral Engineering Conference

Mijal, W.^1 ; Tora, B.^1

Department of Environmental Engineering and Mineral Processing, Faculty of Mining and Geoengineering, AGH University of Science and Technology, Mickiewicza 30, Cracow

30-059, Poland^1

关键词: Asian countries;    Coal preparation plants;    Dense medium separation;    Dry preparation;    Dry separations;    Gravity separation;    Process Technologies;    Separation process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/427/1/012003/pdf
DOI  :  10.1088/1757-899X/427/1/012003

来源: IOP

【 摘 要 】

Dry separation method was used at the beginning of 20th century to separate coal separation process. First industrial applications of dry separation took place in the middle of 1930s. At that time air separator Frazer-Yankey, based on aero suspension was used in in Pittsburgh and Lundale, West Wirginia coal preparation plants. Later, some more constructions like RAW air jig, air table "V" type Birtley, air jig type Kirkup, air table "V" type Peale-Davis or air jig type Bruay-Soulary were constructed. Fast development of wet technologies of processes, especially jigging and heavy dense medium separation caused the discontinuation of the further development of dry separation methods and replacement of dry preparation plants with plants based on wet methods of enrichment. At the end of 20th century and beginning of 21st century dry separation method started once again to be widely used in the world. New types of equipment like FGX vibrating air table, TFX air jig or KAT process technology were introduced to wide applications in Asian countries. The paper describes few constructions of old air separators and new ones, used nowadays. It contains comparison of the separation results obtained by means of various equipment and shows possibility to separate coal in laboratory scale air jig.