Probabilistic framework for product design optimization and risk management

2017 2nd International Conference on Reliability Engineering

Keski-Rahkonen, J.K.^1

Product Management Engineering, Rolls-Royce Marine, PL 220, Rauma

26101, Finland^1

关键词: Dimensioning components;    Engineering practices;    Life cycle cost analysis;    Mechanical components;    Mechanical failure mode;    Practical engineering;    Probabilistic framework;    Product design optimizations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/351/1/012007/pdf
DOI  :  10.1088/1757-899X/351/1/012007

来源: IOP

【 摘 要 】

Probabilistic methods have gradually gained ground within engineering practices but currently it is still the industry standard to use deterministic safety margin approaches to dimensioning components and qualitative methods to manage product risks. These methods are suitable for baseline design work but quantitative risk management and product reliability optimization require more advanced predictive approaches. Ample research has been published on how to predict failure probabilities for mechanical components and furthermore to optimize reliability through life cycle cost analysis. This paper reviews the literature for existing methods and tries to harness their best features and simplify the process to be applicable in practical engineering work. Recommended process applies Monte Carlo method on top of load-resistance models to estimate failure probabilities. Furthermore, it adds on existing literature by introducing a practical framework to use probabilistic models in quantitative risk management and product life cycle costs optimization. The main focus is on mechanical failure modes due to the well-developed methods used to predict these types of failures. However, the same framework can be applied on any type of failure mode as long as predictive models can be developed.