The Application of Problem-Based Learning in Mechanical Engineering

2nd International Conference on Innovation in Engineering and Vocational Education

工业技术;教育

Putra, Z.A.^1 ; Dewi, M.^2

Universitas Negeri, Padang, Indonesia^1

Universitas Putra Indonesia YPTK, Padang, Indonesia^2

关键词: Control groups;    Experiment research;    In-control;    Learning experiences;    Material testing;    Mechanical Engineering Department;    Need analysis;    Problem based learning;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/306/1/012140/pdf
DOI  :  10.1088/1757-899X/306/1/012140

来源: IOP

【 摘 要 】

The course of Technology and Material Testing prepare students with the ability to do a variety of material testing in the study of mechanical engineering. Students find it difficult to understand the materials to make them unable to carry out the material testing in accordance with the purpose of study. This happens because they knowledge is not adequately supported by the competence to find and construct learning experience. In this study, quasy experiment research method with pre-post-test with control group design was used. The subjects of the study were students divided in two groups; control and experiment with twenty-two students in each group. Study result: their grades showed no difference in between the pre-test or post-test in control group, but the difference in grade existed between the pre-test and post-test in experiment group. Yet, there is no significant difference in the study result on both groups. The researcher recommend that it is necessary to develop Problem-Based Learning that suits need analysis on D3 Program for Mechanical Engineering Department at the State University of Padang, to ensure the compatibility between Model of Study and problems and need. This study aims to analyze how Problem-Based Learning effects on the course of Technology and Material Testing for the students of D3 Program of Mechanical Engineering of the State University of Padang.