Characteristics from Recycled of Zinc Anode used as a Corrosion Preventing Material on Board Ship

2nd International Conference on Innovation in Engineering and Vocational Education

工业技术;教育

Barokah, B.^1 ; Semin, S.^2 ; Kaligis, D.D.^1 ; Huwae, J.^1 ; Fanani, M.Z.^1 ; Rompas, P.T.D.^3

Politeknik Kelautan Dan Perikanan Bitung, North Sulawesi

95226, Indonesia^1

Departement of Marine Engineering, Institut Teknologi Sepuluh Nopember, Surabaya

60111, Indonesia^2

Universitas Negeri Manado, Tondano Sulawesi Utara

95618, Indonesia^3

关键词: Cathode protection;    Chemical compositions;    Det Norske Veritas;    Electrochemical potential;    Physical tests;    Zinc anodes;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/306/1/012021/pdf
DOI  :  10.1088/1757-899X/306/1/012021

来源: IOP

【 摘 要 】

The objective of this research is to obtain the values of chemical composition, electrochemical potential and electrochemical efficiency. Methods used were experiment with physical tests conducted in metallurgical laboratory and DNV-RP-B401 cathode protection design DNV (Det Norske Veritas) standard. The results showed that the composition of chemical as Zinc (Zn), Aluminium, Cadmium, Plumbumb, Copper and Indium is suitable of standard. The values of electrochemical potential and electrochemical efficiency were respectively. However it can be concluded that the normal meaning of recycled zinc anode with increasing melting temperature can produce zinc anode better than original zinc anode and can be used as cathode protection on board ships. This research can assist in the management of used zinc anode waste, the supply of zinc anodes for consumers at relatively low prices, and recommendations of using zinc anodes for the prevention of corrosion on board ship.