Study of materials used for the thermal protection of the intake system for internal combustion engines

International Conference on Applied Sciences 2017

Birtok-Bneas, C.^1 ; Raiu, S.^1 ; Puan, V.^1 ; Josan, A.^1

University Politehnica Timisoara, Faculty of Engineering Hunedoara, Department of Engineering and Management, 5 Revolution Street, Hunedoara

331128, Romania^1

关键词: Calorimetric chambers;    Experimental methods;    Heat flux plate;    Thermal protection;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012006/pdf
DOI  :  10.1088/1757-899X/294/1/012006

来源: IOP

【 摘 要 】

The present paper focuses on calculation of thermal conductivity for a new materials developed by the authors, using the heat flux plate method. This experimental method consists in placing the sample of the new material in a calorimetric chamber and heating from underside. As the heat flux which passes through the sample material is constant and knowing the values of the temperatures for the both sides of sample, the sample material thermal conductivity is determined. Six types of different materials were tested. Based on the experimental data, the values of the thermal conductivity according to the material and the average temperature were calculated and plotted.