Modelling the Solid Waste Flow into Sungai Ikan Landfill Sites by Material Flow Analysis Method

3rd International Conference on Smart Material Research

Ghani, Latifah A.^1 ; Ali, Nora'Aini^2 ; Hassan, Nur Syafiqah A.^2

School of Social Development and Economic, Universiti Malaysia Terengganu, Kuala Nerus

21030, Malaysia^1

School of Ocean Engineering, University Malaysia Terengganu, Kuala Nerus, Terengganu

21030, Malaysia^2

关键词: Landfill site;    Leachates;    Material flow analysis;    Open water;    Organic wastes;    Software analysis;    Waste flows;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/293/1/012011/pdf
DOI  :  10.1088/1757-899X/293/1/012011

来源: IOP

【 摘 要 】

The purpose of this paper is to model the material flow of solid waste flows at Kuala Terengganu by using Material Flow Analysis (MFA) method, generated by STAN Software Analysis. Sungai Ikan Landfill has been operated for about 10 years. Average, Sungai Ikan Landfill receive an amount around 260 tons per day of solid waste. As for the variety source of the solid waste coming from, leachates that accumulated has been tested and measured. Highest reading of pH of the leachate is 8.29 which is still in the standard level before discharging the leachate to open water which pH in between 8.0-9.0. The percentages of the solid waste has been calculated and seven different types of solid waste has been segregated. That is, plastics, organic waste, paper, polystyrene, wood, fabric and can. The estimation of the solid waste that will be end as a residue are around 244 tons per day.