Building Coverage Ratio at the Eastern Corridor of Jalan Ir. H. Djuanda Bandung

2nd Annual Applied Science and Engineering Conference

工业技术;自然科学

Megayanti, T.^1 ; Widaningsih, L.^1 ; Minggra, R.^1 ; Dewi, N.I.K.^1

Department of Architecture Engineering Education, Faculty of Technical and Vocational Education, Universitas Pendidikan Indonesia, Bandung, Indonesia^1

关键词: Building coverage ratios;    Coverage area;    Design concept;    Functional changes;    High intensity;    Old buildings;    Qualitative method;    Residential areas;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/288/1/012144/pdf
DOI  :  10.1088/1757-899X/288/1/012144

来源: IOP

【 摘 要 】

Historically in the Colonial period, the Corridor of Jalan Ir. H. Juanda or better known as Jalan Dago was designed as a residential area. As the high development of commercial activity along of Bandung City, almost all of buildings in this area are turned its' function to supported commercial activity. The change is shown in many aspects from the shape of the building and even occur in changing the old building into a new one due to a high intensity of this commercial activity. This paper investigates the use of Building Coverage Ratio regulation related to functional change in the Corridor of Jalan Ir. H. Juanda Bandung. The aim is to what extent the regulations related to Building Coverage area are implemented. This study used a descriptive qualitative method by conducting observation to identify buildings on the Corridor by dividing it into three segments. The results show quantitatively there is a lot of irrelevancies to Building Coverage Ratio regulation which is shown in the second and third segment. Most of the building in the first segment has in compliance with the regulation. However, to build a harmony in characters of City corridor is not only created by Building Coverage Ratio but also others parameters such as the land use, the shape of buildings, facade, and design concept. Thus, it is highly recommended to create a detail regulation regarding those parameters.