On the Static Accuracy of Charge-Discharge Units Intended for Electrical Tests of High Capacity Li-ion Batteries

20th International Scientific Conference Reshetnev Readings-2016

Mizrah, E.A.^1 ; Lobanov, D.K.^1 ; Kopylov, E.A.^1 ; Balakirev, R.V.^1 ; Fedchenko, A.S.^1

Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarskiy rabochiy ave., Krasnoyarsk

660014, Russia^1

关键词: Accuracy of measurements;    Battery voltages;    Charge and discharge;    Charge-discharge;    Digital Integrator;    Required attribute;    Spacecraft power systems;    Stabilization errors;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/255/1/012016/pdf
DOI  :  10.1088/1757-899X/255/1/012016

来源: IOP

【 摘 要 】

Performing of the cycle testing according to the principles of Dynamic Stress Test can significantly reduce the overall time of development and production of batteries, which in turn allows reducing the cost of designing and testing of the spacecraft power systems. Performing of Dynamic Stress Test require special charge-discharge units that allows to perform a full cycle of electrical tests of batteries, including cyclic testing. Providing the required accuracy of measurement and stabilization of certain attributes of Li-ion battery operating modes is one of the problems that arise during thedevelopment of such charge-discharge units. The following attributes are of particular interest: charge and discharge currents, discharge powers, battery voltages. Analysis of the charge-discharge unit as a control system allows evaluating the steady-state stabilization error of the required attributes of the developed device. Moreover, using a digital integrator in the control system of the charge-discharge unit allows providing specified values of steady-state stabilization error of required attributes in different test modes.