Development of a Microcontroller-based Battery Charge Controller for an Off-grid Photovoltaic System

International Research and Innovation Summit 2017

Rina, Z.S.^1 ; Amin, N.A.M.^1 ; Hashim, M.S.M.^1 ; Majid, M.S.A.^1 ; Rojan, M.A.^1 ; Zaman, I.^2

School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh Putra Campus, Perlis, Arau

02600, Malaysia^1

Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Johor

86400, Malaysia^2

关键词: Battery voltages;    Charge controllers;    Continuous charging;    Microcontroller-based;    Novel algorithm;    Photovoltaic systems;    Solar irradiation;    Solar photovoltaics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/226/1/012138/pdf
DOI  :  10.1088/1757-899X/226/1/012138

来源: IOP

【 摘 要 】

A development of a microcontroller-based charge controller for a 12V battery has been explained in this paper. The system is designed based on a novel algorithm to couple existing solar photovoltaic (PV) charging and main grid supply charging power source. One of the main purposes of the hybrid charge controller is to supply a continuous charging power source to the battery. Furthermore, the hybrid charge controller was developed to shorten the battery charging time taken. The algorithm is programmed in an Arduino Uno R3 microcontroller that monitors the battery voltage and generates appropriate commands for the charging power source selection. The solar energy is utilized whenever the solar irradiation is high. The main grid supply will be only consumed whenever the solar irradiation is low. This system ensures continuous charging power supply and faster charging of the battery.