Analysis of dynamics and fit of diving suits

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Mahnic Naglic, M.^1 ; Petrak, S.^1 ; Gersak, J.^2 ; Rolich, T.^1

University of Zagreb, Faculty of Textile Technology, Department of Clothing Technology, Prilaz baruna Filipovica 28a, Zagreb, Croatia^1

University of Maribor, Faculty of Mechanical Engineering, Research and Innovation Centre for Design and Clothing Science, Smetanova ulica 17, Maribor, Slovenia^2

关键词: 3d body scanning;    Body measurements;    Correlation analysis;    Dimensional changes;    Dynamical behaviours;    Pressure analysis;    Prototype verification;    Static and dynamic conditions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/15/152007/pdf
DOI  :  10.1088/1757-899X/254/15/152007

来源: IOP

【 摘 要 】

Paper presents research on dynamical behaviour and fit analysis of customised diving suits. Diving suits models are developed using the 3D flattening method, which enables the construction of a garment model directly on the 3D computer body model and separation of discrete 3D surfaces as well as transformation into 2D cutting parts. 3D body scanning of male and female test subjects was performed with the purpose of body measurements analysis in static and dynamic postures and processed body models were used for construction and simulation of diving suits prototypes. All necessary parameters, for 3D simulation were applied on obtained cutting parts, as well as parameters values for mechanical properties of neoprene material. Developed computer diving suits prototypes were used for stretch analysis on areas relevant for body dimensional changes according to dynamic anthropometrics. Garment pressures against the body in static and dynamic conditions was also analysed. Garments patterns for which the computer prototype verification was conducted were used for real prototype production. Real prototypes were also used for stretch and pressure analysis in static and dynamic conditions. Based on the obtained results, correlation analysis between body changes in dynamic positions and dynamic stress, determined on computer and real prototypes, was performed.