| 2017 International Conference on Structural, Mechanical and Materials Engineering | |
| Laser re-manufacturing of failure 18Cr2Ni4WA gear in low-speed heavy-load mining machine transmission | |
| 材料科学;力学 | |
| Chi, X.F.^1 | |
| Ordos Vocational College, Inner Mongolia Autonomous Region, China^1 | |
| 关键词: Dry wear; Heavy loads; Low speed; Microstructure observation; Mining machines; Operating parameters; Post processing; Re-manufacturing; | |
| Others : https://iopscience.iop.org/article/10.1088/1757-899X/248/1/012017/pdf DOI : 10.1088/1757-899X/248/1/012017 |
|
| 来源: IOP | |
PDF
|
|
【 摘 要 】
This article investigated laser re-manufacturing technology application in mining industry. The research focused on green re-manufacturing of failure spur. Leave the main gear body stay intact after the dirty, rust, fatigue and injured part were removed completely before the green re-manufacturing procedure begin. The optimized laser operating parameters paved the road for excellent mechanical properties and comparatively neat shape which often means less post processing. The laser re-manufactured gear surface was systematically examined, including microstructure observation, and dry wear test at room temperature. The test results were compared with new gear surface and used but not broken gear surface. Finally, it proved that the green re-manufactured gear surface displayed best comprehensive mechanical properties, followed the new gear surface. The resistance of dry wear properties of used but not broken gear surface was the worst.
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| Laser re-manufacturing of failure 18Cr2Ni4WA gear in low-speed heavy-load mining machine transmission | 331KB |
PDF