Bi-fuel System - Gasoline/LPG in A Used 4-Stroke Motorcycle - Fuel Injection Type

5th Asia Conference on Mechanical and Materials Engineering

机械制造;材料科学

Suthisripok, Tongchit^1 ; Phusakol, Nachaphat^1 ; Sawetkittirut, Nuttapol^1

Automotive Engineering Department, College of Engineering, Rangsit University, Phaholyothin Road, Lakhok, Pathumthani

10200, Thailand^1

关键词: Air fuel ratios;    Consumption rates;    Electronic fuels;    Energy density;    Environmental-friendly;    Gasoline vehicle;    Pollutants emissions;    Safety relief valve;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/241/1/012021/pdf
DOI  :  10.1088/1757-899X/241/1/012021

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Bi-fuel-Gasoline/LPG system has been effectively and efficiently used in gasoline vehicles with less pollutants emission. The motorcycle tested was a used Honda AirBlade i110 - fuel injection type. A 3-litre LPG storage tank, an electronic fuel control unit, a 1-mm LPG injector and a regulator were securely installed. The converted motorcycle can be started with either gasoline or LPG. The safety relief valve was set below 48 kPa and over 110 kPa. The motorcycle was tuned at the relative rich air-fuel ratio (λ) of 0.85-0.90 to attain the best power output. From dynamometer tests over the speed range of 65-100 km/h, the average power output when fuelling LPG was 5.16 hp; dropped 3.9% from the use of gasoline91. The average LPG consumption rate from the city road test at the average speed of 60 km/h was 40.1 km/l, about 17.7% more. This corresponded to lower LPG's energy density of about 16.2%. In emission, the CO and HC concentrations were 44.4% and 26.5% lower. Once a standard gas equipment set with ECU and LPG injector were securely installed and the engine was properly tuned up to suit LPG's characteristics, the converted bi-fuel motorcycle offers efficiently, safely and economically performance with environmental friendly emission.