Injection Process Control of the Well at the Hydrodynamic Research of Coalbed

5th International Conference: Modern Technologies For Non-Destructive Testing

材料科学;物理学

Odnokopylov, I.G.^1 ; Galtseva, O.V.^1 ; Krasnov, I Yu^1 ; Smirnov, A.O.^1 ; Karpov, M.S.^1 ; Surzhikova, O.A.^2 ; Kuznetsov, V.V.^3 ; Li, J.^4

National Research Tomsk Polytechnic University, Tomsk, Russia^1

Czech Technical University in Prague, Czech Republic^2

Omsk State Technic University, Omsk, Russia^3

Tsinghua University, Beijing, China^4

关键词: Coalbeds;    Constant level;    High pressure;    High-accuracy;    Hydraulic parameters;    Hydraulic system;    Injection process;    Technological process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/189/1/012010/pdf
DOI  :  10.1088/1757-899X/189/1/012010

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

This scientific work is devoted to the study results of water injection process into the well at the hydrodynamic research by using the high pressure unregulated pump. The injection process should be accompanied by the retention of some hydraulic parameters at constant level during some time. Various variants for use of mechatronic nodes for automatization of water injection process are considered. Scheme for reducing the load on the pump and equipment in hydraulic system and also for improving the quality control system with high accuracy is shown. Simulation results of injection process into the well at the pressure and consumption fixation and recommendations for the use of the proposed schemes depending on the technological process are given.