Results of the modal analysis of the underground mine hydraulic leg in various modes of its operation

International Conference on Mechanical Engineering, Automation and Control Systems 2016

机械制造;无线电电子学;计算机科学

Buyalich, G.D.^1,2,3 ; Buyalich, K.G.^1 ; Uvakin, S.V.^1

T F Gorbachev Kuzbass State Technical University, 28, Vesennyaya Str., Kemerovo

650000, Russia^1

Yugra Technological Institute Branch of Tomsk Polytechnic University, 26, Leningradskaya str., Yurga

652055, Russia^2

Institute of Coal of Siberian Branch, Russian Academy of Sciences, 10, Leningradskiy ave., Kemerovo

650060, Russia^3

关键词: Accurate calculations;    Constant pressures;    Construction of models;    Initial conditions;    Interacting elements;    Natural oscillation;    Operating modes;    Underground mine;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/177/1/012058/pdf
DOI  :  10.1088/1757-899X/177/1/012058

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The article describes the construction of models and the initial conditions for the various modes of legs operation. The article presents the way of setting the initial conditions for the initial thrust with constant pressure and for leg operation in the mode of increased pressure caused by the lowering of the roof. The results of modal analyses conducted for 2 modes of leg operation are shown. It is shown that the form and frequency of natural oscillations of hydraulic legs are determined by their design, pressures of the initial thrust and nominal operating resistance, as well as by the operating modes which differ in schemes of interaction of leg elements with interacting elements of the support and the roof and floor strata. At the same time, changing the operating mode of the legs changes the natural frequency both to the higher and to the lower side, as well as the form of oscillations of certain frequencies. For more accurate calculation of the frequency response of hydraulic legs to the external load of frequencies, it is proposed to take into account not only their design and power properties, but also the modes of their loading.