Numerical analysis of eccentric orifice plate using ANSYS Fluent software

20th Innovative Manufacturing Engineering and Energy Conference

机械制造;能源学

Zahariea, D.^1

Department of Fluid Mechanics, Fluid Machinery and Fluid Power Systems, Technical University Gheorghe Asachi, Iai, Romania^1

关键词: 3D solid model;    CFD analysis;    Convergence criterion;    FLUENT software;    Orifice plate;    Separated flows;    Solid particles;    Solving algorithm;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/161/1/012041/pdf
DOI  :  10.1088/1757-899X/161/1/012041

来源: IOP

【 摘 要 】

In this paper the eccentric orifice plate is qualitative analysed as compared with the classical concentric orifice plate from the point of view of sedimentation tendency of solid particles in the fluid whose flow rate is measured. For this purpose, the numerical streamlines pattern will be compared for both orifice plates. The numerical analysis has been performed using ANSYS Fluent software. The methodology of CFD analysis is presented: creating the 3D solid model, fluid domain extraction, meshing, boundary condition, turbulence model, solving algorithm, convergence criterion, results and validation. Analysing the numerical streamlines, for the concentric orifice plate can be clearly observed two circumferential regions of separated flows, upstream and downstream of the orifice plate. The bottom part of these regions are the place where the solid particles could sediment. On the other hand, for the eccentric orifice plate, the streamlines pattern suggest that no sedimentation will occur because at the bottom area of the pipe there are no separated flows.