Optimization of low cost, non toxic, earth abundant p-type Cu2SnS3 thin film for Photovoltaic application

International Conference on Advances in Materials and Manufacturing Applications 2016

Chaudhari, J.J.^1 ; Patel, S.^1 ; Joshi, U.S.^1

Department of Physics, School of Sciences, Gujarat University, Ahmedabad

380009, India^1

关键词: Chemical solution deposition;    Direct liquid coatings;    Homogeneous thin film;    Large-area deposition;    Photovoltaic;    Photovoltaic applications;    Ternary semiconductors;    X-ray diffraction studies;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/149/1/012165/pdf
DOI  :  10.1088/1757-899X/149/1/012165

来源: IOP

【 摘 要 】

Cu2SnS3(CTS) is one of promising candidate as an absorber material for thin film solar cell. Because of relatively higher prize of Indium and hazardous environmental impact of processing of Gallium, CTS is suitable alternative candidate to Cu2SnS3(CIGS) based solar cell as its constituent elements such as copper, tin and sulphur are abundantly available in earth's crust. CTS is ternary semiconductor and its energy band gap is 1.5eV, which is perfectly matched with solar energy spectrum for maximum transfer of solar energy into electrical energy through photovoltaic action. The primary methods for the synthesis of CTS are Thermal evaporation, electrochemical, sputtering and wet chemical methods. Here in this paper we have optimized a low cost non-vacuum solution process method for the synthesis of CTS without any external sulfurization. The X-ray diffraction studies showed the formation of phase with the peaks corresponding to (112), (220) and (312) planes. Chemical Solution Deposition (CSD) for the synthesis of CTS is suitable for large area deposition and it includes several routes like solvothermal methods, direct liquid coating and nano ink based technique. The metal Chloride salts and thiourea is used as a source of sulphur to synthesize CTS solution and homogeneous thin films of CTS deposited on glass substrate using spin coating method. Use of abrasive solvent like hydrazine and hydrogen sulphide gas which are used to synthesize CTS thin film have detrimental effect on environment, we report eco friendly solvent based approach to synthesize CTS at low temperature 200 °C.