The bearing capacity of the assemblies through compression with intermediate biconical elements

7th International Conference on Advanced Concepts in Mechanical Engineering

Grigore, N.^1 ; Nae, I.^1

Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, Ploiesti, Romania^1

关键词: Elastic compression;    Experimental values;    Friction force;    Intermediate element;    Mating surfaces;    Pressure contacts;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012001/pdf
DOI  :  10.1088/1757-899X/147/1/012001

来源: IOP

【 摘 要 】

The assemblies through elastic compression are made through forced contact between the mating surfaces of the pieces to be assembled. These assemblies function due to friction force developed between surfaces under pressure contact. If the surfaces in contact present elastic deformations, the assembly is removable, if not, the assembly is non-removable. This research presents the calculus algorithm of the capable torque of an assembly with biconical intermediate elements. To verify the accuracy of the theoretical results this research contains the appliance used to obtain the experimental value of the bearing capacity of the assemblies through compression with intermediate biconical elements.