Pressurized metallurgy for high performance special steels and alloys

International Symposium on Liquid Metal Processing & Casting 2015

材料科学;金属工艺学

Jiang, Z.H.^1 ; Zhu, H.C.^1 ; Li, H.B.^1 ; Li, Y.^1 ; Liu, F.B.^1

Dept. of Ferrous Metallurgy, School of Materials and Metallurgy, Northeastern University, No. 3-11, Wenhua Road, Heping District, Shenyang

110819, China^1

关键词: Metallurgical reaction;    Northeastern University;    Physical and chemical properties;    Pressurized electroslag remelting;    Research and application;    Solidification process;    Solidification structure;    Thermodynamics and kinetics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/143/1/012038/pdf
DOI  :  10.1088/1757-899X/143/1/012038

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The pressure is one of the basic parameters which greatly influences the metallurgical reaction process and solidification of steels and alloys. In this paper the history and present situation of research and application of pressurized metallurgy, especially pressurized metallurgy for special steels and alloys have been briefly reviewed. In the following part the physical chemistry of pressurized metallurgy is summarized. It is shown that pressurizing may change the conditions of chemical reaction in thermodynamics and kinetics due to the pressure effect on gas volume, solubility of gas and volatile element in metal melt, activity or activity coefficient of components, and change the physical and chemical properties of metal melt, heat transfer coefficient between mould and ingot, thus greatly influencing phase transformation during the solidification process and the solidification structure, such as increasing the solidification nucleation rate, reducing the critical nucleation radius, accelerating the solidification speed and significant macro/micro-structure refinement, and eliminating shrinkage, porosity and segregation and other casting defects. In the third part the research works of pressured metallurgy performed by the Northeastern University including establishment of pressurized induction melting (PIM) and pressurized electroslag remelting (PESR) equipments and development of high nitrogen steels under pressure are described in detail. Finally, it is considered in the paper that application of pressurized metallurgy in manufacture of high performance special steels and alloys is a relatively new research area, and its application prospects will be very broad and bright.