Research of Influence Electric Conditions Combined ElectroDiamond Processing by on Specific Consumption of Wheel*

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Lobanov, D.V.^1 ; Arkhipov, P.V.^1 ; Yanyushkin, A.S.^1 ; Skeeba, V Yu^2

Bratsk State University, Makarenko St., 40, Irkutsk region, Bratsk

665709, Russia^1

Novosibirsk State Technical University, Prospekt K. Marksa, 20, Novosibirsk

630073, Russia^2

关键词: Comparative analysis;    Cutting properties;    Diamond abrasive;    Diamond processing;    Economic indicators;    Electric conditions;    Electrochemical grinding;    High strength composite materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012081/pdf
DOI  :  10.1088/1757-899X/142/1/012081

来源: IOP

【 摘 要 】

The paper presents results of stability research of cutting properties of diamond abrasive tools in metal binder for grinding high-strength composite materials, as well as the need to reduce the specific consumption of wheel, as one of the most important economic indicators of processing. Shows a comparative analysis of the results of preliminary researches of various methods diamond processing, in which determined that the minimum specific consumption of wheel reached by combined electro-diamond grinding, combining electrochemical grinding with simultaneous continuous electrochemical correction surface wheel. Were conducted more research directed at identifying the specific consumption the diamond wheel on metallic binder depending from electric conditions combined electrodiamond processing. Researches have established the advantages of combined electro-diamond of hard alloys processing and define rational modes to ensure a satisfactory consumption of the diamond wheel, as well as significantly increasing quality and performance.