Effects of process parameters on the molding quality of the micro-needle array

2016 Global Conference on Polymer and Composite Materials

材料科学;化学

Qiu, Z.J.^1 ; Ma, Z.^1 ; Gao, S.^1

State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin, China^1

关键词: Contribution rate;    High aspect ratio;    High-quality products;    Injection molded products;    Injection molding process;    Orthogonal experiment;    Practical production;    Process parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/137/1/012014/pdf
DOI  :  10.1088/1757-899X/137/1/012014

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Micro-needle array, which is used in medical applications, is a kind of typical injection molded products with microstructures. Due to its tiny micro-features size and high aspect ratios, it is more likely to produce short shots defects, leading to poor molding quality. The injection molding process of the micro-needle array was studied in this paper to find the effects of the process parameters on the molding quality of the micro-needle array and to provide theoretical guidance for practical production of high-quality products. With the shrinkage ratio and warpage of micro needles as the evaluation indices of the molding quality, the orthogonal experiment was conducted and the analysis of variance was carried out. According to the results, the contribution rates were calculated to determine the influence of various process parameters on molding quality. The single parameter method was used to analyse the main process parameter. It was found that the contribution rate of the holding pressure on shrinkage ratio and warpage reached 83.55% and 94.71% respectively, far higher than that of the other parameters. The study revealed that the holding pressure is the main factor which affects the molding quality of micro-needle array so that it should be focused on in order to obtain plastic parts with high quality in the practical production.