Effect of turbine materials on power generation efficiency from free water vortex hydro power plant

4th Global Conference on Materials Science and Engineering

Sritram, P.^1 ; Treedet, W.^1 ; Suntivarakorn, R.^1

Department of Mechanical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen

40002, Thailand^1

关键词: Electric power;    Electrical load;    Electricity production;    Free vortices;    Power generation efficiency;    Vortex hydro power plants;    Water flow rate;    Water turbines;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/103/1/012018/pdf
DOI  :  10.1088/1757-899X/103/1/012018

来源: IOP

【 摘 要 】

The objective of this research was to study the effect of turbine materials on power generation efficiency from the water free vortex hydro power plant made of steel and aluminium. These turbines consisted of five blades and were twisted with angles along the height of water. These blades were the maximum width of 45 cm. and height of 32 cm. These turbines were made and experimented for the water free vortex hydro power plant in the laboratory with the water flow rate of 0.68, 1.33, 1.61, 2.31, 2.96 and 3.63 m3/min and an electrical load of 20, 40, 60, 80 and 100 W respectively. The experimental results were calculated to find out the torque, electric power, and electricity production efficiency. From the experiment, the results showed that the maximum power generation efficiency of steel and aluminium turbine were 33.56% and 34.79% respectively. From the result at the maximum water flow rate of 3.63 m3/min, it was found that the torque value and electricity production efficiency of aluminium turbine was higher than that of steel turbine at the average of 8.4% and 8.14%, respectively. This result showed that light weight of water turbine can increase the torque and power generation efficiency.