New HMBA lattice for PF-AR

8th International Particle Accelerator Conference

Higashi, N.^1 ; Harada, K.^1 ; Kobayashi, Y.^1 ; Nagahashi, S.^1 ; Nakamura, N.^1 ; Ueda, A.^1

High Energy Accelerator Research Organization, KEK, 1-1 Oho, Tsukuba, Ibaraki, Japan^1

关键词: Beam injection;    Beam lifetime;    Beam lines;    Booster ring;    COD correction;    Conventional injections;    Dynamic aperture;    Touschek lifetime;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/874/1/012025/pdf
DOI  :  10.1088/1742-6596/874/1/012025

来源: IOP

【 摘 要 】

Photon Factory Advanced Ring (PF-AR) has been operated for users about 30 years from 1987. The lattice and optics are almost not changed from the original one as the TRISTAN booster ring constructed in 1984. The lattice employs FODO structure and the horizontal emittance for the 6.5 GeV user run is about 300 nmrad. In order to improve the performance of PF-AR dramatically, the full replacement of the accelerator to the ESRF type HMBA (Hybrid multi bend achromat) lattice is examined. In order to geometrically fit the new lattice to the present PF-AR tunnel, the new ring consists of 12 cells with four long straight sections. The emittance is improved to about 500 pmrad at 3 GeV. With the present user experimental hall at the northern half of the ring, at least eight undulator beam lines can be constructed. The simulated dynamic aperture is about 1.5 cm at the long straight section with reasonable magnetic errors and COD correction. The Touschek lifetime is about 6 hours. The beam injection with conventional injection system is no problem and the beam lifetime is long enough.