Overview of the experimental tests in prototype

HYPERBOLE Symposium 2017 (HYdropower plants PERformance and flexiBle Operation towards Lean integration of new renewable Energies)

Egusquiza, Eduard^1 ; Valentín, David^1 ; Presas, Alexandre^1 ; Valero, Carme^1

Center for Industrial Diagnostics and Fluid Dynamics (CDIF), Polytechnic University of Catalonia (UPC), ETSEIB, Av. Diagonal, 647, Barcelona

08028, Spain^1

关键词: Draft tubes;    Dynamic behaviours;    Experimental test;    Operating points;    Operational parameters;    Spiral case;    Stationary parts;    Vibration sensors;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/813/1/012037/pdf
DOI  :  10.1088/1742-6596/813/1/012037

来源: IOP

【 摘 要 】

Experimental tests in prototype are necessary to understand the dynamic behaviour of the machine during different operating points. Hydraulic phenomena as well as its effect on the structure need to be studied in order to avoid instabilities during operation and to extend the life-time of the different components. For this purpose, a complete experimental study of a large Francis turbine prototype has been performed installing several sensors along the machine. Pressure sensors were installed in the penstock, spiral case, runner and draft tube, strain gauges were installed in the runner, vibration sensors were used in the stationary parts and different electrical and operational parameters were also measured. All these signals were acquired simultaneously for different operating points of the turbine.