Detection and analysis of part load and full load instabilities in a real Francis turbine prototype

HYPERBOLE Symposium 2017 (HYdropower plants PERformance and flexiBle Operation towards Lean integration of new renewable Energies)

Presas, Alexandre^1 ; Valentin, David^1 ; Egusquiza, Eduard^1 ; Valero, Carme^1

Center for Industrial Diagnostics and Fluid Dynamics (CDIF), Polytechnic University of Catalonia (UPC), ETSEIB, Av. Diagonal, 647, Barcelona

08028, Spain^1

关键词: Best efficiency point;    Energy demands;    Experimental test;    Hydraulic machines;    Operating points;    Output power;    Project number;    Reduced scale models;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/813/1/012038/pdf
DOI  :  10.1088/1742-6596/813/1/012038

来源: IOP

【 摘 要 】

Francis turbines operate in many cases out of its best efficiency point, in order to regulate their output power according to the instantaneous energy demand of the grid. Therefore, it is of paramount importance to analyse and determine the unstable operating points for these kind of units. In the framework of the HYPERBOLE project (FP7-ENERGY-2013-1; Project number 608532) a large Francis unit was investigated numerically, experimentally in a reduced scale model and also experimentally and numerically in the real prototype. This paper shows the unstable operating points identified during the experimental tests on the real Francis unit and the analysis of the main characteristics of these instabilities. Finally, it is shown that similar phenomena have been identified on previous research in the LMH (Laboratory for Hydraulic Machines, Lausanne) with the reduced scale model.