Robot Kinematics Identification: KUKA LWR4+ Redundant Manipulator Example

12th European Workshop on Advanced Control and Diagnosis

Kolyubin, Sergey^1 ; Paramonov, Leonid^1 ; Shiriaev, Anton^1

Dept. of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim

NO-7491, Norway^1

关键词: Comparative analysis;    Denavit-hartenberg parameters;    Geometric calibrations;    Kinematic parameters;    Numerical optimizations;    Optical coordinate measuring machines;    Optimal calibration;    Robotic manipulators;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/659/1/012011/pdf
DOI  :  10.1088/1742-6596/659/1/012011

来源: IOP

【 摘 要 】

This work is aimed at a comprehensive discussion of algorithms for the kinematic parameters identification of robotic manipulators. We deal with an open-loop geometric calibration task, when a full 6D robot's end-effector pose is measured. Effective solutions of such a task is of high interest in many practical applications, because it can dramatically improve key robot characteristics. On the first step, we select optimal calibration configurations. A comparative analysis of three different algorithms and two observability indexes used for numerical optimization is provided. Afterwards, using the acquired and pre-processed experimental data we identify modified Denavit-Hartenberg parameters of the manipulator. Estimates are obtained resolving original nonlinear forward kinematics relations. Finally, we compare nominal and calibrated geometric parameters and show how much deviations in these parameters affect robot positioning accuracy. To the best of our knowledge, such integrated efforts are new for the KUKA LWR4+ robot and Nikon K610 optical coordinate measuring machine (CMM), which were used in the study. Discussion of practical issues on how to organise the experiment is an additional contribution of this work. The proposed procedure is highly automated and can be implemented to improve manipulator's performance on a periodic basis.