DAQ Architecture for the LHCb Upgrade

20th International Conference on Computing in High Energy and Nuclear Physics

物理学;计算机科学

Liu, Guoming^1,2 ; Neufeld, Niko^1

CERN, Geneva, Switzerland^1

ITER, France^2

关键词: Aggregate throughput;    Barrel shifters;    Data acquisition system;    Front end electronics;    Gigabit Ethernet;    High-speed network technology;    Network technologies;    Traffic-shaping;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/513/1/012027/pdf
DOI  :  10.1088/1742-6596/513/1/012027

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

LHCb will have an upgrade of its detector in 2018. After the upgrade, the LHCb experiment will run at a high luminosity of 2 × 1033cm-2s-1. The upgraded detector will be read out at 40 MHz with a highly flexible software-based triggering strategy. The Data Acquisition (DAQ) system of LHCb reads out the data fragments from the Front-End Electronics and transports them to the High-Lever Trigger farm at an aggregate throughput of ∼ 32 Tbit/s. The DAQ system will be based on high speed network technologies such as InfiniBand and/or 10/40/100 Gigabit Ethernet. Independent of the network technology, there are different possible architectures for the DAQ system. In this paper, we present our studies on the DAQ architecture, where we analyze size, complexity and relative cost. We evaluate and compare several data-flow schemes for a network-based DAQ: push, pull and push with barrel-shifter traffic shaping. We also discuss the requirements and overall implications of the data-flow schemes on the DAQ system.