Research on Three-Dimensional Digital Assembly Technology of Communication Satellite Cable

3rd International Conference on Aeronautical Materials and Aerospace Engineering

航空航天工程

Liu, Zhibin^1^2 ; Song, Xiaohui^1^2 ; Yin, Pu^3 ; Zhou, Xuewei^1

Beijing Institute of Spacecraft Environment Engineering, Beijing

100094, China^1

Beijing Engineering Research Center, Intelligent Assembly Technology and Equipment for Aerospace Product, Beijing

100094, China^2

Communications Satellite Division, Beijing

100094, China^3

关键词: Assembly technology;    Cable channel;    Design and manufactures;    Design efficiency;    Digital assembly;    Production modes;    Telecommunication satellites;    Three-dimensional digitization;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/608/1/012037/pdf
DOI  :  10.1088/1757-899X/608/1/012037

学科分类：航空航天科学

来源: IOP

【 摘 要 】

With the development of information technology and the increasing task of communication satellite products, higher requirements are put forward for the design and manufacture of cables. The traditional cable design is based on the two-dimensional deployment layout. The design efficiency is low and the error of cable length is large. It is difficult to check the interference in the cable channel. In view of the new technology status of a telecommunication satellite, a comprehensive study has been carried out from cable design, production and manufacture to field laying of assembly. The design and production modes have been analysed and expounded, and the field laying of assembly has been summarized, which not only improves the efficiency, but also strengthens the quality and reliability. The three-dimensional digitization of subsequent satellites has been carried out in an all-round way. Design, manufacture and assembly technology provide technical basis and experience for reference.