Specifications of Heavy Diesel Lubricating Oil Improved by MWCNTs and CuO as Nano-additives

1st International Conference on Petroleum Technology and Petrochemicals

石油天然气工程

Jaber, Thulfiqar N.^1 ; Sukkar, Khalid A.^1 ; Karamalluh, Abullhassan A.^2

Chemical Engineering Department, University of Technology, Baghdad, Iraq^1

Mechnical Engineering Department, University of Technology, Baghdad, Iraq^2

关键词: Flash points;    High surface area;    Nano additives;    Nano-lubricants;    Thermal characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/579/1/012014/pdf
DOI  :  10.1088/1757-899X/579/1/012014

来源: IOP

【 摘 要 】

In this investigation, the properties of heavy diesel lubricants were enhanced by adding the nano-additives. The purpose of this research is verifying the enhancement of the rheological and thermal characteristics of the lubricating oils by adding the nano-additives, in order to upgrade to the highest level for performance lubricant in the system. The SAE 15W40 (Oil parent) was mixed with two types of nanomaterials (MWCNTs and CuO) at four various concentrations by (0.1, 0.2, 0.5, and 1 % wt.) to prepare the nano-lubricants, studying and comparing their properties with parent lubricants. The results indicated that the thermal conductivity values of (OilMWCNTs) and (OilCuO NPs) at 1 wt. % concentration of both additives increased by 23%, 15.3% respectively. Also, the flash point of both nano-lubricants comparison with parent oil increased by (19.54%, 15.9%) respectively. It was concluded that (OilMWCNTs) showed higher lubricant's specification than (OilCuO NPs) due to the high surface area of MWCNTs. Hence, the operating properties of lubricating oil much enhanced when scattered the carbon nanotubes and copper oxide NPs.