Comparative Study of Single and Composite Nanolubricants in Automotive Air-Conditioning (AAC) System Performance

1st International Postgraduate Conference on Mechanical Engineering

工业技术（总论）;机械制造

Hamisa, A.H.^1^2 ; Azmi, W.H.^1 ; Zawawi, N.N.M.^1 ; Sharif, M.Z.^1 ; Shaiful, A.I.M.^3

Faculty of Mechanical Engineering, University Malaysia Pahang (UMP), Pekan Pahang

26600, Malaysia^1

Faculty of Engineering, University College of Yayasan Pahang (UCYP), Taman Gelora, Jln Dato' Abdullah, Kuantan Pahang

25050, Malaysia^2

School of Manufacturing Engineering, Universiti Malaysia Perlis, Perlis

01000, Malaysia^3

关键词: AAC systems;    Automotive air conditioning;    Comparative studies;    Leading experts;    Nano-lubricants;    Nanolubricant;    Single nanoparticle;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/469/1/012044/pdf
DOI  :  10.1088/1757-899X/469/1/012044

学科分类：工业工程学

来源: IOP

【 摘 要 】

Various studies by leading experts have shown the effectiveness of nanolubricant in improving the performance of the automotive air conditioning (AAC) system. Along with the advancement of technology, composite nanolubricant have been introduced and have been proven to have better properties than normal nanolubricant. The Al2O3-SiO2/PAG composite nanolubricant have better stability, better heat transfer, and improve tribology characteristic compare to its individual single nanoparticles nanolubricant. However, until now no experiments were conducted to test the effectiveness of composite nanolubricant in the AAC system. An experimental study is then taken by testing the Al2O3-SiO2/PAG in AAC system. The results of this experiment have been compared with results of the previous study that uses Al2O3/PAG and SiO2/PAG in AAC system. It is found that the composite nanolubricant have a high enhancement in the COP and does reduce the compressor work of the AAC system. The comparison between Al2O3-SiO2/PAG, Al2O3/PAG and SiO2/PAG nanolubricant demonstrates that Al2O3-SiO2/PAG, has better performance in term of compressor work reduction and COP enhancement at an average of 28.7 % and 31.64 %, respectively. At last, it was recommended to use the Al2O3-SiO2/PAG nanolubricant for application in AAC system.