Equivalent moisture diffusion coefficient of fiber reinforced composites

2nd International Conference on Mechanical Engineering and Applied Composite Materials

机械制造;材料工程

Zhu, Libao^1 ; Li, Yongqing^1

College of Naval Architecture and Ocean Engineering, Naval University of Engineering, Wuhan, China^1

关键词: Fiber reinforced composites;    Fiber volume fractions;    Measurement standards;    Moisture absorption;    Moisture diffusion coefficient;    Moisture diffusivity;    Representative volume element (RVE);    Unidirectional fibers;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/544/1/012019/pdf
DOI  :  10.1088/1757-899X/544/1/012019

来源: IOP

【 摘 要 】

Total diffusion time and the total moisture absorption amount were proposed as the measurement standards of equivalent coefficients for composites moisture diffusion with impermeable fibers. Representative volume element (RVE) models and 2D transient finite element models of unidirectional fiber reinforced composites were established and the accuracy of the RVE model for calculating the equivalent diffusivity was verified. The influences of fiber volume fraction, fiber arrangement and interfaces on the equivalent moisture diffusivity were investigated using the RVE models. The results show that the equivalent moisture diffusivity decreases with the increase of fiber volume fraction. The equivalent moisture diffusivity of random fiber distribution is smaller than that of the periodic fibers distribution, and this difference can be neglected when the fiber volume fraction is relative small. The interfaces with higher diffusivity than matrix will apparently increase the composites diffusivity.