System-on-chip design is becoming increasingly complex as technology scaling enables more and more functionality on a chip. This scaling and complexity has resulted in a variety of reliability and validation challenges including logic bugs, hot spots, wear-out, and soft errors. To make matters worse, as we reach the limits of Dennard scaling, efforts to improve system performance and energy efficiency have resulted in the integration of a wide variety of complex hardware accelerators in SoCs. Thus the challenge is to design complex, custom hardware that is efficient, but also correct and reliable.High-level synthesis shows promise to address the problem of complex hardware design by providing a bridge from the high-productivity software domain to the hardware design process. Much research has been done on high-level synthesis efficiency optimizations. This thesis shows that high-level synthesis also has the power to address validation and reliability challenges through two solutions.One solution for circuit reliability is modulo-3 shadow datapaths: performing lightweight shadow computations in modulo-3 space for each main computation. We leverage the binding and scheduling flexibility of high-level synthesis to detect control errors through diverse binding and minimize area cost through intelligent checkpoint scheduling and modulo-3 reducer sharing. We introduce logic and dataflow optimizations to further reduce cost. We evaluated our technique with 12 high-level synthesis benchmarks from the arithmetic-oriented PolyBench benchmark suite using FPGA emulated netlist-level error injection. We observe coverages of 99.1% for stuck-at faults, 99.5% for soft errors, and 99.6% for timing errors with a 25.7% area cost and negligible performance impact. Leveraging a mean error detection latency of 12.75 cycles (4150x faster than end result check) for soft errors, we also explore a rollback recovery method with an additional area cost of 28.0%, observing a 175x increase in reliability against soft errors.Another solution for rapid post-silicon validation of accelerator designs is Hybrid Quick Error Detection (H-QED): inserting signature generation logic in a hardware design to create a heavily compressed signature stream that captures the internal behavior of the design at a fine temporal and spatial granularity for comparison with a reference set of signatures generated by high-level simulation to detect bugs. Using H-QED, we demonstrate an improvement in error detection latency (time elapsed from when a bug is activated to when it manifests as an observable failure) of two orders of magnitude and a threefold improvement in bug coverage compared to traditional post-silicon validation techniques. H-QED also uncovered previously unknown bugs in the CHStone benchmark suite, which is widely used by the HLS community. H-QED incurs less than 10% area overhead for the accelerator it validates with negligible performance impact, and we also introduce techniques to minimize any possible intrusiveness introduced by H-QED.
【 预 览 】
附件列表
Files
Size
Format
View
Low-cost error detection through high-level synthesis
PDF
download
878987797
028-85220240
